Flash stock firmware on Galaxy Note 3 Neo SM-N750 flash file download

Here is the guide to flash stock firmware on our device. 

Download firmware from here - 

I) Bangladesh - http://rapidgator.net/file/36ba0c121...71615.zip.html

II) India(INU) - http://rapidgator.net/file/af8780e8c...50602.zip.html

III) India(INS) - http://rapidgator.net/file/1ead801e6...72237.zip.html

Procedure - 

1. Download Odin from here - http://rapidgator.net/file/cb00b5952...v3.09.zip.html

2. Extract Firmware zip file that you downloaded earlier from above link, you will get a .tar.md5 file and some other files (optional).

3. Extract Odin zip file and you will get Odin3

v3.09.exe along with few other files.

4. Power off your Android device. Wait 5-6

seconds for vibration to confirm complete

switch off.

5. Now, put the Galaxy Note 3 Neo SM-N750 in

Download Mode by pressing and holding

down the Home & Volume Down button

together while pressing the Power button. A

warning screen will come up; press Volume

Up button to enter Download Mode.

6. Now run Odin3 v3.09.exe (see Step 3) as an

Administrator because Admin privileges is

required to complete the process smoothly

(only applicable Windows Vista and higher).

7. Now connect your device to your PC using

USB cable. An “Added!!” massage will appear

in Odin’s message box. If you don’t get the

same then you should try another USB port

(try USB port located in back in your desktop

PC). If that too don’t work then you should

reinstall the driver. If you successfully see the

“Added!!” message in Odin then you are ready

to go in next step. You should also see COM

port with a number in Yellow if you

successfully added your device.

8. Click the AP Button, and select that .tar.md5

file that you get in Step 2. If you are using old

Odin then add the file to PDA button.

9. In Odin window, make sure only Auto Reboot

and F. Reset Time check boxes are selected.

10. Double check everything that we mentioned in Step 8 & Step 9 above. Now, once satisfied hit the START button to begin the flashing

process.

11. Once flashing completed, your Galaxy Note 3 Neo SM-N750 will restart and soon you will

see a PASS message with green background

in the left-most box at the very top of the

Odin. You can now unplug the USB cable to

disconnect your device from computer.

Congrats! You just updated your Galaxy Note 3 Neo

SM-N750 to Android 4.3 Jelly Bean firmware. Go to

Settings > About device to verify this firmware

update.